The Sharps 308 Balanced Bolt Carrier Group Complete has the same innovative design as the Sharps 5.56 Balanced Bolt Carrier Group. The 308 carrier is precisely machined from case-hardened 8620 alloy steel. The 308 Relia-Bolt™ is made of robust 9310 nickel-chrome-moly alloy steel. The entire BCG is finished with DLC (Diamond Like Carbon) Coating.

The Sharps 308 Balanced Bolt Carrier Group has the SRC logo machine cut and visible when the ejection port door is open. Bolt has dual ejectors and is compatible with Generation 1 DPMS LR-308 style platforms. This is NOT compatible with Generation 2 DPMS or Armalite platforms.

Technical Specification

Technical Data on DLC Coating

•  .067″ Firing Pin

• Batch MPI and HPT tested

• Tensile strengths of 1550-1600 mpa, or 220,000-235,000 psi.

• Toughness of over 200 ft./lb. Charpy C-Notch

• HRC of 46 yields a 15% increase in hardness at the same toughness comparing to Carpenter 158 & 9310

• Weight of 17.7 oz

Limited Lifetime Warranty

If any SRC Balanced Bolt Carrier or Relia-Bolt™ is found to have manufacturer defects, SRC will repair or replace it at no charge.  Manufacturer defects include broken lugs, out of spec parts or defective parts.  Although our BCG is DPMS Gen 1, there are so many variables, sometimes a little troubleshooting, or fine tuning of parts, may be required for proper functionality.  Before a part is replaced or refunded, SRC reserves the right to inspect and test part(s) in question to determine if it is defective. Please keep in mind that altering the product renders the warranty void.